ham-radio-news

Extra Class question of the day: Filter types and applications

September 06, 2012 Dan KB6NU

Different types of filters have different characteristics. For example, a Chebyshev filter is a filter type described as having ripple in the passband and a sharp cutoff. (E7C05)On the other hand, the distinguishing features of an elliptical filter are extremely sharp cutoff with one or more notches in the stop band. (E7C06)

Filters have both amplitude and phase-response characteristics. In some applications, both are important. Digital modes, for example, are most affected by non-linear phase response in a receiver IF filter. (E7C14)

The Chebyshev filter was named for Pafnuty Chebyshev, whose mathematical work led to the development of these filters. Sometimes filters are named for their circuit topoology. Pi is the common name for a filter network which is equivalent to two L networks connected back-to-back with the inductors in series and the capacitors in shunt at the input and output. (E7C11) When you look at the circuit diagram for a filter of this type, you’ll see that it looks like the Greek letter pi.

Often, you’ll choose a filter type for a particular application. For example, to attenuate an interfering carrier signal while receiving an SSB transmission, you would use a notch filter. (E7C07)

Today, many of these filters are implemented using digital signal processing. The kind of digital signal processing audio filter might be used to remove unwanted noise from a received SSB signal is an adaptive filter. (E7C08) The type of digital signal processing filter might be used to generate an SSB signal is a Hilbert-transform filter. (E7C09)

Some filters are used almost exclusively in a particular application. A cavity filter, for example, would be the best choice for use in a 2 meter repeater duplexer. (E7C10)

The post Extra Class question of the day: Filter types and applications appeared first on KB6NU's Ham Radio Blog.