- Multiple frequencies scanning is now supported (by providing multiple -f arguments at command line and -l <squelch>). Since there is no audio output and it’s hard to determine right squelch level, a squelch debug option (-r) is implemented. Use it to experiment with squelch value, it’s simple: good squelch values flood stdout with “hopping freq!” messages yet avoid too high squelch levels. In general, values between 20-30 work good with my setup (big city, lots of radio interference, NOAA turnstile which gives -3db due to rhcp polarization).
- Aircraft and airline databases now supported (using the acarsdec builtin ones). DBs are text files using simple format, so you may easily update them. I would very much appreciate your help to keep that up-to-date.
- Certain improvements in frequency hopping code as compared to rtl_fm, but don’t expect wonders, it takes time to retune so data loss is not avoidable especially if you provide lots of frequencies to scan or huge ranges.
- A simple Makefile to make it simpler
In the future gat3way hopes to support the decoding of multiple ACARS channels as well. The updated rtl_acars software can be downloaded from github here.